| Step | | Procedure & Parts & Tools |
| 1 |
|
REMOVE THE POWER CORD FROM THE CORD HOOK.
|
| 2 |
|
UNHOOK THE VAC HOSE FROM THE HOSE HOOK.
|
| 3 |
|
SLIDE UP ON THE BAG COVER LATCH. PULL THE BAG COVER FROM THE MACHINE.
|
| 4 |
|
PUSH IN ON THE RED LEVER ON THE RIGHT SIDE TO UNLOCK THE BAG.
|
| 5 |
|
PULL THE BAG DOWN OFF THE INTAKE HOSE.
|
| 6 |
|
REMOVE THE 4 SCREWS HOLDING THE UPPER VAC HOUSING.
| Screwdriver-phillips |
|
|
| 7 |
|
PULL THE UPPER VAC HOUSING UP TO SEPARATE IT FROM THE LOWER VAC HOUSING.
|
| 8 |
|
LOOSEN THE 2 SCREWS HOLDING THE GUIDE HOUSING.
| Screwdriver-phillips |
|
|
| 9 |
|
PULL UP ON THE MIDDLE VAC HOUSING TO SEPARATE IT FROM THE LOWER VAC HOUSING.
|
| 10 |
|
LOCATE THE TERMINAL BLOCK ON THE BOTTOM OF THE MIDDLE VAC HOUSING. INSERT 1 LEAD INTO THE TERMINAL BLOCK AND INSERT THE OTHER LEAD IN THE TERMINAL BLOCK DIRECTLY ACCROSS FROM THE FIRST LEAD. SET THE VOLT METER TO CONTINUITY. IF THE VOLT METER BEEPS, THE TERMINAL BLOCK IS OKAY. REPEAT THIS PROCESS WITH THE OTHER 2 OPENINGS ON THE TERMINAL BLOCK.
| Volt meter (True RMS capable) |
&Width=100)
|
|